-40%

Prewired LED Light Assembly with on/off switch and 9 volt battery connector.

$ 4.19

Availability: 8089 in stock
  • Wavelength: Visible
  • Custom Bundle: No
  • Country/Region of Manufacture: China
  • Nominal Voltage: 9 Volt Battery
  • Viewing Angle: 30°
  • Number of Pins: 2
  • LED Color: Red, Blue, Green, Yellow, Orange, White, Purple
  • Light Intensity: 15000 mcd
  • LED Size: 5 mm
  • Modified Item: No
  • Brand: Unbranded
  • Lens Surface: Clear
  • Number of LEDs: 1
  • Condition: New
  • Mounting Style: Stand Alone
  • Configuration: Single
  • Luminous Flux: 3.21 lm
  • Type: LED Light
  • MPN: Does Not Apply
  • Nominal Current Rating: 15 mA
  • Brightness: 15 cd/m2
  • Lens Shape: Dome
  • All returns accepted: ReturnsNotAccepted

    Description

    Want to add some light you your next project? These LED assemblies are very affordable and offer really clean bright light to any project.
    Specifications:
    Length - Approximately 15" (Switch located in the middle at ~7.5")
    LED is 5mm diameter x 10mm long
    9 Volt Battery
    (Not Included)
    Switch - 8mm wide X 15mm long X 8mm high - Click on / Click off
    Operating Temperature 105 F (41 C)
    White Led Intensity is 15000 mcd with a 30 deg apex angle (~3.21 Lumens)
    15-20mA current draw (depends on color, white draws the most at 20mA)
    Typical 9 volt battery has 500mA hour capacity, continuous use would provide ~25 hours of light
    All batteries are different, so 25 hours is an average, if it is turned off some times the life will be much longer.
    Also used in Cake LED Light Decorating, Cosplay Costumes, Model Police and Fire Trucks, Doll Houses and more. Shipping and Handling is flat rate for 1st LED assembly, each additional LED only adds {{detail_product_description}}.25 to total shipping cost. Available in White, Red, Green, Blue, Orange,Pink, Purple, Yellow, and
    New
    - Yellow Candle Flicker (simulates candle flame)